Manufacturer spec sheets for the commercial AC and ventilation equipment we install and service. Educational articles now live in the Knowledge Hub.
39 datasheets · Brand: Daikin · Application: Commercial
Combination with the Sky Air Advance outdoor gives good total value for typical commercial applications. Stylish flush unit with fully-closing louvres, 100° Coanda discharge, built-in DIII network compatibility, and R-32 refrigerant.
Paired with Sky Air Alpha for the highest SEER/SCOP figures in the range. Same 100° discharge and 3.8m ceiling reach as Advance, with tighter part-load performance for buildings that run long hours.
Mini Sky Air outdoor extends the total refrigerant pipe run to 50m — useful when planners restrict outdoor unit locations, or in listed buildings where the condenser must sit out of sight.
Paired with a standard split outdoor unit — the most economical spec in the family, suited to small retail units, single-office fit-outs, and mixed residential/commercial buildings.
Fully-flush cassette paired with Mini Sky Air outdoor for up to 50m pipe runs. Optional fresh-air intake, individual airflow control, energy-saving sensors — the specifier-grade choice for offices and hotels.
Same flush FFA cassette body paired with a standard split outdoor — the economical spec for small commercial fit-outs, cellular offices, and boutique-hotel single-room deployments. Flexible airflow and optional fresh-air intake carry over.
800×800 roundflow cassette with 360° discharge, paired with the AZAS outdoor. The value option when a Fully Flat FFA cassette isn't needed and the ceiling tile grid can accommodate an 800mm module. Individual damper control per direction avoids cold-draught complaints.
800×800 roundflow cassette with the Sky Air Advance outdoor — the specifier default for offices, hotels and retail where 360° coverage matters more than tile-flush aesthetics. R-32, DIII-Net compatible, presence and floor-sensor options.
FCAG-B roundflow indoor paired with Sky Air Alpha for best-in-class SEER/SCOP. Right for BREEAM-scored fit-outs and long-hours occupied spaces where energy-in-use is scored on the tender.
High-capacity FCAHG-B body — increased cooling and heating output for rooms with tall ceilings, dense occupancy, or high solar gain. Same 360° roundflow pattern and Alpha efficiency, sized up for hospitality atriums, showrooms and dense open-plan floors.
FCAG-B roundflow cassette with a standard split outdoor — value option for small commercial and light-commercial fit-outs where the outdoor can sit within ~20m. R-32 refrigerant, individual damper control retained.
Ultra-slim indoor unit designed for shallow ceiling voids where a standard ducted won't fit. Delivers medium static pressure to serve multi-zone layouts, runs quietly, and adapts to non-standard duct routes. Compatible with both Sky Air (AZAS) and split (ARXM) outdoor units for spec flexibility.
Medium-static ducted indoor paired with a standard split outdoor — the value option for single-zone fit-outs where the outdoor can sit within ~20m. Compatible with the FBA slim-body indoor for shallow ceiling voids.
Medium-static ducted indoor with the Sky Air Advance outdoor — the specifier's default for typical office, hotel and retail fit-outs. R-32 refrigerant, DIII-Net compatible, extended pipe runs versus the Standard split.
Paired with Sky Air Alpha for the highest seasonal efficiency in the ducted range. Same medium static pressure and slim body as Advance, with tighter part-load performance for long-hours buildings and BREEAM-scored fit-outs.
Latest RZAG-B outdoor pairing for the FBA ducted range — updated compressor and heat exchanger for further part-load gains. Use when specifying against the newest Daikin selection software or when tender documents call up the -B suffix.
High-static-pressure variant of the FBA ducted range — sustains airflow through long, restrictive or high-resistance duct networks that would starve a medium-static unit. Compatible with both Sky Air Advance (RZASG) and Alpha (RZAG) outdoors. Right for larger open-plan floors, deep-plan retail and multi-zone hotel layouts.
FDXM-F ultra-slim indoor paired with Sky Air Alpha — designed for the shallowest ceiling voids where even the FBA slim-body won't fit. Right for hotel bedroom corridors, low-ceiling retrofits and grade-listed spaces where every mm of void matters.
Same ultra-slim FDXM-F indoor paired with a standard split outdoor — the value spec for boutique-hotel single-room retrofits and light-commercial fit-outs where the outdoor can sit within ~20m. R-32 refrigerant.
Concealed floor-mounted indoor paired with the Alpha outdoor — up to 50m total pipe run so the outdoor unit can sit well away from the building. The specifier's default for Grade-II listed hotels and executive fit-outs where cassette and ducted installations aren't consented.
Same concealed FNA-A9 indoor with a standard split outdoor — the value option when the outdoor can sit within ~20m. Suits boutique-hotel single-room retrofits and high-end residential where the Alpha's extra pipe budget isn't needed.
Slim visible floor-standing console paired with the AZAS outdoor — the value option when there's no cabinet joinery to conceal the unit and a wall-mounted install isn't wanted. Suited to small offices, consulting rooms and single-zone retail retrofits.
Visible FVA console with the Sky Air Advance outdoor — the standard commercial spec where the unit needs to sit on show. R-32 refrigerant, DIII-Net compatible, extended pipe budget versus the Active pairing.
Visible FVA console paired with Sky Air Alpha for best-in-class SEER/SCOP figures. Right for long-hours occupied spaces, BREEAM-scored fit-outs and energy-in-use tenders where a concealed cabinet install isn't practical.
Nexura pairs the FVXM-B floor console with a warm radiant front panel, giving a radiator-like heat feel at low airflow — the go-to when perimeter cold spots (curtain-wall glazing, north-facing seating) can't be solved by convective heating alone. R-32 refrigerant, split outdoor.
Multi-split outdoor range — a single condenser drives up to five indoor units of mixed capacity, cutting external plant real estate for small commercial and mixed-use buildings. Right for satellite offices, small hospitality with multiple guest rooms, and mixed retail/residential where a full VRV outdoor is oversized. R-32 refrigerant.
FAA-B commercial wall-mounted indoor with the AZAS outdoor — the value spec for small retail, single offices and salons. Compact profile, R-32 refrigerant, DIII-Net compatible for basic BMS integration.
FAA-B indoor paired with the Sky Air Advance outdoor — extended pipe runs, tighter part-load performance and full DIII-Net support. The specifier default for small commercial fit-outs where wall-mounted is the right form factor.
Best-in-class SEER/SCOP wall-mounted pairing — FAA-B indoor with Sky Air Alpha outdoor. Right when energy-in-use is tendered on a small single-zone project (satellite office, consulting room, salon) and cassette isn't viable.
Perfera indoor with the Sky Air Alpha RZAG-B outdoor — best-in-class SEER/SCOP for boutique-commercial and premium residential retrofits. Sensor-driven airflow, whisper-quiet operation, R-32 refrigerant.
Perfera indoor with a standard split RXM-A outdoor — high-efficiency spec at the value end of the range. Presence and floor sensors, night-quiet operation, R-32. The default when a commercial FAA-B isn't warranted but Comfora isn't premium enough.
Emura's curved metallic-finish body (silver, white or matt black) is designed to sit on show in boutique hotels, restaurants and design-led offices. Same Perfera-grade filtration and sensor package underneath, R-32 refrigerant.
The slimmest of the design-led range — Stylish suits tourist accommodation, small boutique hospitality and design-conscious residential retrofits where visible ductwork or trunking is unacceptable. R-32, Bluetooth control, four-finish choice.
Comfora is the value baseline in the residential-style wall range — reliable inverter operation, R-32 refrigerant, quiet-mode fan control. The right spec for satellite offices, home-office extensions and light-commercial single-zone jobs where headline efficiency isn't tendered.
Compact 3-phase VRV IV outdoor for small to mid-sized commercial buildings — drives up to nine indoor units across mixed types (cassette, ducted, wall-mounted). The step up from a multi-split when the project needs per-zone control, refrigerant piping over 30m, or BMS integration via DIII-Net.
VRV IV heat-pump outdoor for buildings that need heating and cooling but not simultaneous zone-to-zone. Modular 8-54 HP range, VRT (variable refrigerant temperature) control for seasonal efficiency gains, DIII-Net BMS integration.
3-pipe VRV IV outdoor that lets the system heat and cool different zones simultaneously, recovering waste heat between them. Delivers typical 25-40% seasonal energy saving in mixed-use buildings (offices with server rooms, sun-side vs shade-side hotels, retail with cold storage).
VRV 5 3-pipe heat-recovery outdoor on R-32 refrigerant — lower GWP than R-410A, higher seasonal efficiency, and reduced footprint versus VRV IV. The specifier default for new-build commercial where F-Gas phase-down and embodied-carbon reporting matter.
Daikin VAM heat-recovery ventilation unit — supplies filtered outdoor air, extracts stale indoor air, and recovers up to ~76% of the temperature difference across a plate heat exchanger (EN 308). F7 filtration standard, HEPA optional, DIII-Net compatible for BMS scheduling. Sized 250-2000 m³/h.
Educational articles moved to the AccuTemp Knowledge Hub.
Visit the Knowledge Hub